Technical
Truss to Truss Details
Home » Technical » Detail and Connections Library » Truss to Truss DetailsTruss to Truss Details
Featured below are common truss to truss connections in an easy to choose format allowing you to select the detail appropriate to the connection type, orientation and tie-in capacity.
|
Connection Type
|
Orientation of Connection
|
Connector
|
Detail Number
|
Tie-In Capacity
|
PDF
|
DWG
|
DXF
|
|
Field Installed
|
Front Face of Girder w/ No USGP required | USKW | US2US - 8.1 | Up to 725# | US2US - 8.1.pdf  |
US2US - 8.1.dwg |
US2US - 8.1.dxf |
|
Field Installed
|
Front Face of Girder w/ No USGP required | 2-USKW |
US2US - 14 |
Up to 1,200# | US2US - 14.pdf |
US2US - 14.dwg |
US2US - 14.dxf |
|
Field Installed
|
Back Face of Girder w/ No USGPX required | USKW | US2US - 9 | Up to 1,165# | US2US - 9.pdf |
US2US - 9.dwg |
US2US - 9.dxf |
|
Field Installed
|
Vertical Web at Tie-In Location | USKW | US2US - 21 | Up to 2,370# | US2US - 21.pdf |
US2US - 21.dwg |
US2US - 21.dxf |
|
Field Installed
|
Block at Tie-In Location | USKW | US2US - 13.1 | Up to 1,900# | US2US - 13.1.pdf |
US2US - 13.1.dwg |
US2US - 13.1.dxf |
|
Factory Installed
|
Front Face of Girder with USGP | USKW | US2US - 24 | Up to 1,920# | US2US - 24.pdf |
US2US - 24.dwg |
US2US - 24.dxf |
|
Factory Installed
|
Back Face of Girder with USGP | USKW | US2US - 23 | Up to 1,165# | US2US - 23.pdf |
US2US - 23.dwg |
US2US - 23.dxf |
|
Factory Installed
|
Back Face of Girder | USKW | US2US - 23A | Up to 1,165# | US2US - 23A.pdf |
US2US - 23A.dwg |
US2US - 23A.dxf |
|
Factory Installed
|
Front Face of Girder w/ No USGP required | USKW | US2US - 11.1 | Up to 1,900# | US2US - 11.1.pdf |
US2US - 11.1.dwg |
US2US - 11.1.dxf |
|
Field Installed
|
Vertical web Tie-In/ USC Girder | 14 ga angle | US2US - 26.1 | Up to 7,775# | US2US - 26.1.pdf |
US2US - 26.1.dwg |
US2US - 26.1.dxf |
|
Field Installed
|
Vertical web Tie-In/ USD Girder | 14 ga angle | US2US - 27.1 | Up to 7,775# | US2US - 27.1.pdf |
US2US - 27.1.dwg |
US2US - 27.1.dxf |
